Third Running Board Support

I finally got around mounting the third support bracket for my running boards. You might say, what? you only need two! Not if you have a tilt bed and the running board floats in air, since its not attached to the rear fender. So, since I got grand-kids running and jumping on things, and it just helps to keep things in place and not rattle. I added a third support.

I had to notch the cross bracket under the large end of the running board, so the support bracket would set flush against the bottom. After Viagra Online Dosage – Difference for Brand and Generi… that, it was drilling a couple of holes and she was done. I had Bob at Tuff Skin sprayed under my boards and fenders, so I had to use some rattle can undercoating on the bracket and the area I cut to protect it from rusting.

IMG_20160313_180845109_HDR[1]

IMG_20160315_195445178[1]

IMG_20160315_204436738[1]

IMG_20160315_192958[1]